Port And Starboard Data Options - Navman FUEL 3100 Installation And Operation Manual

3-4 Port and Starboard data options

The port and starboard data options available depend
upon your boat configuration, as follows:
Single fuel tank / single engine / single fuel
transducer - no port and starboard data
options available.
Single fuel tank / twin engines / twin fuel
transducers - port and starboard readouts for
the fuel FLOW option only.
Twin fuel tanks / twin engines / twin fuel
transducers - port and starboard readouts for
all the fuel data options.
In addition, the fuel gauge splits into two columns;
the left column shows the fuel level in the port
fuel tank and the right column shows the fuel
FUEL 3100 Installation and Operation Manual
level in the starboard fuel tank.
If your boat configuration can support
port and starboard readout capability,
see section 4-3 Fuel setup, to set it up.
To display the port or starboard fuel data
on the Main Display, select the required
fuel data option then press ENT to
change between the PORT, STBD and
TOTAL readouts.
To choose port or starboard data on the
Fuel setup menu or Low Fuel Alarm setup menu,
select the required option and press ENT, then press
or to change between PORT and STBD. Press
ENT again to make changes.
9