Advertisement
OPEN the cover of remote panel
; Power Switch
; Heat Switch
I Select Full Body Heat On/Off
i Air Massage Programs
i Select Program I , II, III or Off.
; Air Massage Intensity
: Select Program I, II, or III.
; Vibration Massage Programs
; Select Program I , II, III or Off.
; Vibration Locations
i Select Program I, II or III.
I Lumbar Massage Program
i Select the program On/Off.
i Lumbar Massage Intensity
; Select Program I , II, or I I I .
; Down - Chair Back & Leg Rest
; Push to recline the chair back and raise the leg rest.
! Up - Chair Back & Leg Rest
I Push toincline the chair back and lower the leg rest.
Whereto Use the Unit
Ensure there is adequate space for reclining.
Keep at least
4 inches
Approx. 66 inches
Keep at least
4 inches
Mats
CAUTION
• Do not use the unit in an area with high humidity, such as the bathroom, as this can lead to
electric shock or other accidents.
• Place the unit on a completely leveled surface. Failure to do so may cause the lounger to
tip over, leading to accidents.
• Do not use the massage lounger in direct sunlight or in a place where it will be exposed to
high temperatures, such as in front of a heater, as this can cause discoloration or hardening
of the upholstery.
• Place the unit on a mat to prevent floor damage.
Advertisement
