Advertisement
1.
POWER BUTTON
: Press to turn the LCD monitor ON. The POWER LAMP above the switch will illuminate.
2.
POWER LED LAMP
: When SET is normally operated, a green lamp is turned on. The green lamp flickers in the status of STAND-BY.
STAND BY : ON/OFF BUTTON is off
3.
PC BUTTON
: When you press this button, PC mode is selected.
4.
S-VIDEO BUTTON
: When you press this button, S-VIDEO mode is selected.
If you want to see a clean and clear video through S-VIDEO input, select this.
5.
V2 BUTTON
: When you press this button, VIDEO2 mode is selected.
Select this button to insert the camera input or video input into VIDEO CH2 terminal.
6.
V1 BUTTON
: When you press this button, VIDEO1 mode is selected.
Select this button to insert the camera input or video input into VIDEO CH1 terminal.
7.
VOLUME +, - BUTTON
: Adjust the volume up and down.
8.
SEL BUTTON
: When you want to select the desired item in menu, press this button to move.
9.
MENU BUTTON
: When you press this button, the menu window appears. When you press this button again, the menu window disappears.
10. CONTRAST
: Adjust the screen s contrast. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)
11. BRIGHT
: Adjust the screen s brightness. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)
12. COLOR
: Adjust the screen s color. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)
13. TINT
: Adjust the screen s tint. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)
14. 15. 16. 17 VIDEO IN/OUT
: This is the terminal to receive the video from the camera. It is used to connect the video, to connect & record the video, or
to connect many monitors.
18. 19. 20. 21 AUDIO IN/OUTPUT
: It is the terminal to receive the audio from the camera.
It can be used by connecting the external audio equipment.
22. S-VIDEO JACK
: When you want to see a high definition S-VIDEO, use the S-VIDEO input of this monitor. You can enjoy the clean and
clear video.
23. PC JACK
: When you use this monitor as PC monitor, you can use it by connecting the PC Cable to PC Jack of this monitor.
24. POWER INLET
: Inlet the AC power (AC100~240V, 50/60Hz)
25. KENSINGTON LOCK HOLE
It will be able to prevent a robbery.
Advertisement
