Appendix; Care And Maintenance; Problems - SAGEMCOM RM50 User Manual

Appendix

5. Appendix

5.1 Care and Maintenance

Turn off your IP Radio. Use a smooth and dry cloth to wipe. Do not use a
rough cloth, powerful liquid cleaners, thinner painting, alcohol nor other
solvents to clean. These products can damage your IP Radio.

5.2 Problems

Refer to the table presented below in case of an operational malfunction:
Problems
The Remote Control does
not function.
The screen is switched off. Confirm that :
Chosen station can not be
heard.
Remedies
• Confirm that the batteries are correctly
installed.
• Confirm that you are not too far from the
Radio (7 meters are the maximum recommended)
and that the infra-red sensor is not blocked.
• Make sure that the remote control is well
pointed towards the Radio sensor.
• The power adapter is properly connected to a
power socket.
• The power connector is properly plugged into
the Radio.
• To hear a station, you must confirm your
selection by pressing the Wheel.
• Make sure that your Radio is not set to the
MUTE mode.
• Adjust the volume level.
• Confirm the network configuration.
37