Table of Contents
Advertisement
Setup
4.2.3 Alarm 1&2
Alarm function is for you to set up wake-up Alarms or to remind you of
important dates or times. You can set up 2 Alarms.
Both Alarm 1 and Alarm 2 have the same set up method. Alarm 1 settings are
as follows:
Time settings:
(1) Rotate the Wheel to choose, and then press the Wheel to select On.
(2) Rotate the Wheel to set Hours and Minutes.
Repeat settings:
(3) After the time is set, press the Wheel to bring up the Repeat setting page.
(4) Rotate the Wheel to choose, and then press the Wheel to select an alarm
repeat setting "Once," "Everyday," "Weekly," "Weekdays," or "Weekend."
Note: When the alarm time has been set in another alarm already, you will
see an "Alarm already set" message and the screen will go back to the first
setting page to reset a time.
Sound settings:
(5) After the Repeat setting is set, press the Wheel to bring up the Sound
setting page.
(6) Rotate the Wheel to choose and press the Wheel to select an alarm sound
source from "FM," "Internet radio," or " UPnP." If you do not want to choose
sound source, you can simply select "Buzzer" as your Alarm sound.
Note: If the sound source that you have selected is no longer available, the
device will play a "Buzzer" sound instead.
29
Hide quick links:
Advertisement
Table of Contents
