Honda Automobiles HRM215 Harmony Owner's Manual page 62

MAINTENANCE & ADJUSTMENTS
Gear Shift Cable Adjustment
(HRB21 SSXA & HRM215SXA only)
With the transmission in 1st gear, pull the gear shift lever all the
way back and release it; the lever should be centered on the
number "1" on the lever cover. If adjustment is necessary:
1. Loosen the locknuts with a 10 mm wrench and move the
adjuster up or down as required.
2. Tighten the locknuts and recheck lever alignment.
3. Verify that the lever operates smoothly.
4. Start the engine and verify that the shift lever engages 1 st and 2nd
gear by engaging the drive clutch lever. Readjust if necessary.
GEAR SHIFT LEVER
57