TP-Link TL-WDR4300 User Manual page 83

To add a new rule, follow the steps below.
1. Click the Add New... button, the next screen will pop-up as shown in Figure 4-65.
2. Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the
Incoming Ports manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
either TCP or UDP, or All.
5. Select Enable in Status field.
6. Click the Save button to save the new rule.
Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger
this rule.
TL-WDR4300
Figure 4-64 Port Triggering
Figure 4-65 Add or Modify a Triggering Entry
- 73 -
N750 Wireless Dual Band Gigabit Router