Transmitter Module Using Methods; Channel Transform Methods Of Transmitter - SOYO -WM24G02 User Manual

Hi-fi wireless digital audio module
Table of Contents

Advertisement

2.4G Digital Wireless Audio Transceiver Module SOYO-WM24G02
which the LED is out, until the LED remains on. Stop pressing, and it will get into the
5-second-point-to-point ID pairing status where the LED flickers. If you keep on pressing the
button while the LED is flickering, it will keep on pairing, which is the function of pairing point
to mass, a function of one transmitter pairing a mass of several receivers.
7
LED
Indicating Module Working Status: It remains on while normally working.
8
VCC
Voltage DC 3.6—6V
9
GND
Power
10
NC
Non-connected
11
NC
Non-connected
12
DS_ CLK_
Displaying serial clock
13
DS_ DATA
Displaying serial data
14
SDA
Signal data Adjustment, controlling input volume.
15
SCL
Signal data clock, controlling input volume
16
CH-
Channel down
17
REST
Module reset ,also used as Mute function
18
AMP
Selection of MIC input gain amplification:0dB 、20dB

2.1.3 Transmitter Module Using Methods

With unified channel and ID when produced, the Transmitter Moduleis ready to work as soon as it is interfaced in
accordance with Figure 1 and switched on.
For Mode A, switch is chosen through channel selection and 8 channels are available to avoid
interference .Receiver has to be adapted synchronously as transmitting channel is done when channel is
selected.
For Mode B, by adding function of ID pairing to it, interference can be resisted automatically. And it has 20
channels for you to choose. So to avoid getting sounds mixed up, having the function of ID pairing is suggested.
Paired ID is the real random address, whose coincidence rate is only 1/20,000,000, therefore it is nearly
impossible to have the coincidence

2.1.4 Channel Transform Methods of Transmitter

The module has an extremely good resistance to interference as a result of the 2.4G digital
wireless technology. It can be very effectively shielding the interference from cordless phones, cellular
phones, walkie-talkies and other wireless devices and ensures a hi-fi wireless audio. However, the
characteristics of the wireless products determine that the module can not avoid the interference with
http://www.chinasoyo.com
SOYO TECHNOLOGY DEVELOPMENT CO.,LTD.
8
Page
of 13

Advertisement

Table of Contents
loading

Table of Contents