Guide Of Placing An Order - SOYO -WM24G02 User Manual

2.4G Digital Wireless Audio Transceiver Module SOYO-WM24G02
receiver module for more than 3s (during which the LED is continuously out for 3s) till the LED is on. The
moment you release it, it gets into the 5s-point-to-point-ID-pairing state. (during which the LED flickers). When
the receiver has received the ID paired signals, its LED will flicker three 3 times and the module gets into the
receiving state, waiting for the signals from the transmitter. Normally, when pairing is accomplished, the LED
will be out. Use the methods repeatedly till the .point-to-mass pairing work is completed After that, if you release
the CH button of the transmitter, the pairing point to mass comes to an end.

Guide of Placing an Order

III.
SOYO-WM24G02A
We can offer two modes for you to choose: SOYO-WM24G02A and SOYO-WM24G02B
Differences:
Mode to be ordered
Channel selection method
ID feature
Sampling frequency
http://www.chinasoyo.com
SOYO-WM24G02B
SOYO-WM24G02A SOYO-WM24G02B
Manual
No.
44.1khz@16bit*2
SOYO TECHNOLOGY DEVELOPMENT CO.,LTD.
auto
Only one ID number for each transmitter and
receiver. Additional ID distinguishing interference
resistance to keep interferences away.
64khz@16bit*2
13 Page of 13