Honda HRC215 Owner's Manual page 47

9. MAINTENANCE
Blade Installation
1. Clean dirt and grass from the blade mounting area.
rv
2. Position the blade and blade holder on the ROTO-STOP assembly, and install
the blade bolts.
NOTE:
.
l
Be sure the blade is positioned right side up (rear edges turn upward;
center hole rim projects downward). If the blade is installed upside down,
the edges cannot cut properly, and the center may jam the ROTO-STOP
l
The blade bolts are specially designed for this application and must not
be replaced with any other bolts.
3. Tighten the blade bolts with a torque wrench. Use
a
wooden block to prevent
the blade from turning when tightening the bolts. If you do not have a torque
wrench, have an authorized Honda lawn mower dealer tighten the blade
bolts.
Blade bolt torque:
36.2-43.4
ft-lb (5.0-6.0 kg-m)
TORQUE WRENCH
ROTO-STOP
BLADE HOLDER
BLADE
45