Top Cover - HP EliteBook 8530p Maintenance And Service Manual

Top cover

Description
For use with computer models with Core2 Duo or Extreme Dual-Core processors
For use with HP EliteBook 8530w computer models with Quad Core processors
For use with HP EliteBook 8530p computer models
Fingerprint reader board (includes fingerprint reader board cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
Remove the top cover:
1. Turn the computer upside-down, with the front toward you.
2. Remove the two rubber screw covers (1). The rubber screw covers are included in the Plastics
Kit, spare part number 495076-001.
3. Remove the seven Torx T8M2.5×7.0 screws (2) that secure the top cover to the base enclosure.
76 Chapter 4 Removal and replacement procedures
Battery on page 45).
Hard drive on page 51)
Optical drive on page
Keyboard on page 61)
Switch cover on page
Display assembly on page
47)
66)
69)
Spare part number
502335-001
502336-001
495068-001
495063-001