HP EliteBook 8530p Maintenance And Service Manual page 81

8. If it is necessary to replace the display bezel or display hinges, remove the following:
(1) Four rubber screw covers on the display bezel top edge
(2) Two rubber screw covers on the display bezel bottom edge
(3) Four Phillips PM2.5×7.0 screws on the display bezel top edge
(4) Two Phillips PM2.5×7.0 screws on the display bezel bottom edge
NOTE: See Display inverter on page 49
9. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the
display bezel until the bezel disengages from the display enclosure.
10. Remove the display bezel (3). The display bezel is available using the following spare part
numbers:
●
501111-001 (for use with HP EliteBook 8530p computer models equipped with WLAN and
WWAN capability)
●
501112-001 (for use with HP EliteBook 8530p computer models equipped with WLAN and
WWAN capability and inegrated webcam)
●
506812-001 (for use with HP EliteBook 8530w computer models equipped with WLAN and
WWAN capability)
●
506813-001 (for use with HP EliteBook 8530w computer models equipped with WLAN and
WWAN capability and integrated webcam)
for display inverter replacement instructions.
Component replacement procedures 73