Page 2
Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.Verilux.com to request a free catalog and learn more about all our quality Verilux products, or call our toll-free number 1-800-786-6850.
Important Safety Instructions ® READ ALL INSTRUCTIONS BEFORE USING YOUR CLEANWAVE UV-C SANITIZING FURNITURE & BED VAC When using an electrical appliance, the following basic safety precautions should always be observed. WARNING: To reduce the risk of fi re, electric shock or injury: •...
Important Safety Instructions continued the UV-C bulb from activating when the product is removed from the cleaning surface. The UV-C bulb will re-activate when placed back on a cleaning surface. • For your safety, DO NOT attempt to manually over-ride the safety switch. •...
Introduction ® ® Your new Verilux CleanWave UV-C Sanitizing Furniture & Bed Vac is both a convenient and powerful hand-held vacuum and an easy-to-use bed vacuum. The hand-held design makes it a fast and effective anytime, anywhere vacuum. As a bed vacuum, the combination of powerful suction and UV-C light quickly removes dust and dirt while eliminating up to 99.9% of viruses, bacteria, dust mite...
UV-C Sanitizing Furniture & Bed Vac Features ® Your new Verilux CleanWave UV-C Sanitizing Furniture & Bed Vac features: • A powerful ultraviolet (UV-C) illumination system that eliminates up to 99.9% of viruses (including the H1N1 “swine fl u” virus), bacteria, fungus and mold spores.
Initial Set-up Vacuuming with UV-C 1. Attach the vacuum cleaner to the base unit. Insert it into the base unit and then press the rear down fi rmly. Press lever down when docking vacuum. Then pull up until lever clicks to lock.
Mattress / Bedding Cleaning Guidelines In order for the UV-C light to be fully effective against bacteria and other pathogens, the area to be cleaned must be exposed for a suffi cient time. We suggest the following guidelines: • Start in one corner of the bed. •...
Care and Maintenance Cleaning the Inlet If the inlet is blocked by dust, completely remove the foreign materials – after fi rst turning the vacuum OFF. A blocked inlet may result in weakened suction and noise. If the inlet is blocked, there is also a risk of damage or malfunction caused by overheating.
Care and Maintenance continued Avoiding Exposure to Dust When emptying any vacuum cleaner, it is diffi cult to avoid exposure to dust. If you are an allergy sufferer or sensitive to dust, you can minimize this risk. 1. Place the dust container in a large bag, and close the bag as tightly as possible around the container before emptying it.
Use of an incorrect bulb can result in damage. To order a replacement bulb, use the Component Re-order form included with this product, or call Verilux Customer Service at 1-800-786-6850 or visit www.Verilux.com. 1. Detach the protective grill on the...
Troubleshooting Poor Suction The fi lter may be blocked. • Remove and clean the fi lter. The dust container may be full. • Empty dust container. UV-C Light is not Illuminated Vacuum cleaner may not be fi tted to base unit correctly. •...
Need help?
Do you have a question about the CleanWave and is the answer not in the manual?
Questions and answers