Page 2
Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.verilux.com to request a free catalog and learn more about all our quality Verilux products, or call our toll-free number 1-800-454-4408.
Important Safety Instructions READ ALL INSTRUCTIONS BEFORE USING YOUR CLEANWAVE ® SANITIZING FURNITURE & BED VAC When using an electrical appliance, the following basic safety precautions should always be observed. WARNING: To reduce the risk of fire, electric shock or injury: •...
Page 5
Important Safety Instructions — continued • DO NOT point the vacuum cleaner directly at your or anyone’s face. • Do not touch the UV-C bulb during or directly after use; it will be hot and may burn. • UV-C bulbs contain mercury, which is considered a hazardous waste and is subjected to Federal and/or State hazardous waste regulations.
Introduction Your new Verilux CleanWave Sanitizing Furniture & Bed Vac is both a ® ® convenient and powerful handheld vacuum and an easy to use bed vacuum. The handheld design makes it a fast and effective anytime, anywhere vacuum. As a bed vacuum, the combination of powerful suction and UV-C light quickly removes dust and dirt while eliminating up to 99.9%...
CleanWave Sanitizing Furniture & Bed Vac Features ® Your new Verilux CleanWave Sanitizing Furniture & Bed Vac features: ® • A powerful ultraviolet (UV-C) illumination system that eliminates odors and up to 99.9% of viruses (including H1N1), bacteria (including MRSA ), pests, †...
Initial Set-up Vacuuming with UV-C 1. Attach the vacuum cleaner to Lock/Release the base unit. Insert it into the Lever base unit and then press the rear down firmly. Press lever down when docking vacuum. Then pull up until lever clicks twice to lock (see Figure 1).
Mattress / Bedding Cleaning Guidelines In order for the UV-C light to be fully effective against bacteria and other pathogens, the area to be cleaned must be exposed for a sufficient time. We suggest the following guidelines: • Start in one corner of the bed. •...
Care and Maintenance Cleaning the Inlet If the inlet is blocked by dust, completely remove the foreign materials – after first turning the vacuum OFF. A blocked inlet may result in weakened suction and noise. If the inlet is blocked, there is also a risk of damage or malfunction caused by overheating.
Care and Maintenance — continued Avoiding Exposure to Dust When emptying any vacuum cleaner, it is difficult to avoid exposure to dust. If you are an allergy sufferer or sensitive to dust, you can minimize this risk. 1. Place the collection cup in a large bag, and close the bag as tightly as possible around the cup before emptying it.
Use of an incorrect bulb can result in damage. ® To order a replacement bulb, use the Component Reorder form included with this product, or call Verilux Customer Service at 1-800-786-6850 or visit www.verilux.com. 1. Detach the protective grill on the...
Troubleshooting Poor Suction The filter may be blocked. • Remove and clean the filter. The collection cup may be full. • Empty collection cup. UV-C Light is Not Illuminated Vacuum cleaner may not be fitted to base unit correctly. • Ensure the cleaner is securely locked into position. Safety switch may not be depressed or sensors not covered.
Verilux warrants this product to be free from defects in material and workmanship for a period of one year from the date of the original retail purchase from Verilux or an authorized Verilux distributor. Proof of purchase is required for all warranty claims. During the limited warranty period, Verilux, Inc.
Need help?
Do you have a question about the CleanWave VH07 and is the answer not in the manual?
Questions and answers