Optica P218Z Menu Tree page 9

Zoom
Click on the buttons to zoom in or zoom out.
Focus
Click on the buttons to adjust the focus as near, far or automatic.
Run Preset / Cruise / Sequence
After setup the Preset / Cruise / Sequence lines according to
select a Preset / Cruise / Sequence line and start it by clicking on the <Run>
button (
PT Speed (1~10)
Set a number between 1 and 10 as the PT Speed every time users pan or tilt
the Camera via the Pan & Tilt Direction Control Panel. 1 is the slowest, 10 is the
fastest.
Set Center Mode
Right click on the Live Video Pane and select <Set Center Mode>. Then users
can position the interest area in the center of the Live Video Pane automatically
by clicking on the point of interest. In <Set Center Mode>, right click on the Live
Video Pane again and select <Set Emulated Joystick Mode> to return to control
the Camera direction by left clicking and dragging the pointer
Video Pane.
8
(Zoom In / Zoom Out)
/ / ).
(Auto Focus / Focus Near / Focus Far)
PTZ Settings,
on the Live