Camera-Misc 1 (Miscellaneous Setups Menu 1) - Optica P218Z Menu Tree

2.4.10 Camera—Misc 1 (Miscellaneous Setups Menu 1)
The Miscellaneous Setting Menu 1 can be found under this path: PTZ>
Camera- Misc 1.
In the Camera—Misc (Miscellaneous) Setups Menu 1, users can set various
camera parameters including Backlight Compensation (BLC), Sharpness,
Exposures Compensation (ExpComp), Image Flip, Speed by Zoom and ICR
function. Each setting is specified as follows:
BLC
Users can choose to activate or disable the BLC function. Click on the button
<Set> to save the setting.
Sharpness
Increasing the sharpness level can make the image looked sharper; especially
enhancing the object's edge. The Sharpness value is adjustable from 1 to 15.
Click on the button <Set> to confirm the setting.
Exp Comp
Users can define the value of Exposure Compensation; the value ranges from 1
to 15.
Flip
Users can track an object continuously when it passes through under the Dome
Camera with setting Flip to Mechanical (M.E.) mode or Digital Flip (Image)
mode.
NOTE: Flip setting is manual-controlled only. If a Preset Position or a
point for other function (ex. Sequence) is set in the position that can only
be reached through FLIP motion, when the Flip function is turned off, the
position cannot be reached anymore.
NOTE: To make the Dome Camera tilt between a specific range, such
as -10° to +100° or -10° to +190°, please go to the Tilt Range setting
page to set the tilt angle range. Otherwise, the Dome Camera will tilt 90°
as the default setting.
60