Kicker IMPULSE IX405D Manual

Five-Channel Power Amplifier
Congratulations! You have just purchased one of the latest in a long line
of exceptional car audio power amplifiers from Stillwater Designs. Your
KICKER IX405D was designed and engineered by the same team which
created many other international award winning KICKER components like the
ZR, ZX, DX, and XS-Series amps. It contains a number of cutting-edge features
that let you build an entire car audio system around this single power
component. It will give you years of outstanding performance and
dependability when installed in a properly designed system.
Thanks for buying KICKER. Enjoy.
KICKER IMPULSE AMPLIFIER FEATURES
Separate electronic crossovers are built in for convenience and allow you to
select full range or highpass for front and rear channels as well as lowpass fre-
quencies for the sub output.
The Kicker Impulse IX405 Amplifier is 2 Ohm stable on all five channels; the
sub out can be bridged to as low as 2 Ohm mono. For connection to the source ,
you have the option of low level RCA inputs or a high level input for use with
radios that don't have RCA outputs.
Separate KICKEQ bass and treble controls give you the ability to boost low
and high frequencies to tailor the music to your taste. Dash-mounted remote
control lets you adjust bass output levels from your listening position.
Auto-resetting short circuit and overthermal protection circuits are incorpo-
rated to protect the amplifier from failure due to extreme conditions.
State of the art circuitry including MOSFET power supply and glass epoxy cir-
cuit boards are used to ensure many years of trouble free operation.
IMPULSE IX405D