Cruise Control; Forward Collision Alert; Lane Departure Warning - Chevrolet Equinox 2013 Getting To Know Manual

CRUISE CONTROL

Setting Cruise Control
1. Press the ON/OFF button. The
Cruise Control symbol will illuminate in
white in the instrument cluster.
2. When traveling at the desired speed,
rotate the SET– switch down to set the
speed. The
green in the instrument cluster.
FORWARD COLLISION ALERT/LANE DEPARTURE WARNINGF

Lane Departure Warning

When crossing a detected lane marking without using a turn signal, a visual alert flashes on
top of the instrument panel and beeps sound.
Lane Departure Warning button on the left side of the steering wheel to
Press the
turn the system on or off.
F Optional equipment
14
symbol will illuminate in
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the switch up to resume a
set speed.
When the system is active, rotate the
switch up to increase speed.
SET– Set/Coast
When the system is active, rotate the
switch down to decrease speed.
CANCEL
Press to cancel the cruise control but retain
the set speed in memory.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.

Forward Collision Alert

When approaching a vehicle directly ahead
too quickly, a visual alert flashes on top of
the instrument panel and beeps sound.
Collision Alert button on
Press the
the left side of the steering wheel to set
the alert timing.
See Driving and Operating in your Owner Manual.