Nokia 6500 classic RM-265 Service Manual page 18

7. Fit the ANTENNA ASSEMBLY onto the C-COVER.
9. Pass the coax cable as shown. Ensure that the cable is not
damaged.
11. Place the LIGHT SWAP PWB into the C-COVER.
Page 18 (23)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
8. Remove the protection film from the UI FLEX.
10. Fit the COAX CLAMP.
12. Check the correct position of the PWB before going on.
6500 classic RM-265
Service Manual Level 1&2
ISSUE 2