Satellite Radio Operations - Clarion CZ309 Owner's Manual

Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Interface Adapter (Mini-Tuner
Included) : CNP2000UC
Clarion cable for CNP2000UC : CNPCLA1
• SIRIUS Satellite Radio Receiver: SIRCL3
• SIRIUS Satellite Translator Adapter:
CLA-SC1 (which needs Sirius universal Tuner
sold separately.)
Notes:
• When the function is differ depending to the
connected receiver, they are distinguished by
the following notations:
"XM": for an XM
Satellite Radio Receiver
"SIRIUS": for
a
SIRIUS Satellite Radio Receiver
• XM and the XM logos are trademarks of XM
Satellite Radio Inc.
Selecting
a
Satellite Radio mode
1. Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting
a
band
1. Press the [BND] button to select a band.
This changes the reception band as follows:
·XM: XM1 ~
XM2
~
XM3
~
XM1 ...
·SIRIUS: SR1
~
SR2
~
SR3
~
SR1 ...
• Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned in (no signal is
yet received):
XM: "LOADING", SIRIUS: "LINKING"
• A channel without a broadcast has been
selected:
XM: "--- CH", SIRIUS: "INVALID CH"
• A channel not covered by your contract:
XM: "UPDATING", SIRIUS: "CALL 888" -
"539-SIRI" (alternated)
Confirming your SIRIUS ID
1. Press and hold the [DISP] button for 1
second or longer to display the ADJUST
item.
2. Press the [1+11] or
[~]
button to select "SID
DISP".
3. Press the
[r~~
]
button, the display will display
the upper 6 digits.
4. Press the [.A.] or [....] button to switch
between the display for the upper 6 digits
and lower 6 digits.
5. To return to the previous mode, press the
[DISP] button.
Displaying channel labels
1. Press the [DISP] button to select the desired
channel label.
Channel
~
Category
~
Title (Artist)
~
Radio
text
~
Channel. ..
Channel selection
1. Channels are selected with the [1+11] or
[~]
button.
*
For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
• Quick tuning
1. Press and hold the [1+11] or
[~]
button for 1
second or longer.
• Step tuning
1. Press the [1+11] or
[~]
button.
CZ309
23