Assembly Hints - Nokia Slide 6260 Service Manual

11.

ASSEMBLY HINTS

1) After attaching the MAIN FLEX, slide the connectors
carefully through the gaps.
3) Rotate the MICRO SD PWB ASSEMBLY into position
and attach the two remaining clips with the SS-93.
5) Tighten the screws to the torque of 11Ncm in the
order shown.
18
2) After connecting the MICRO SD PWB ASSEMBLY
connector, first attach the two clips.
4) When placing the engine board, make sure that the
camera key is not damaged.
6) When placing the ANTENNA COVER ASSEMBLY, first
attach the appendix. Then press the assembly down to
attach the remaining clips.
Confidental
Copyright © 2009 NOKIA. All rihts reserved
6260 Slide RM-368
Service Manual Level 1&2
ISSUE 1