4. Turn the bulb socket
counterclockwise to remove it
from the lamp assembly.
5. Remove the bulb from the
socket or disconnect the bulb
assembly from the harness
connector.
6. Install the new bulb.
7. Reinstall the bulb socket to the
lamp assembly, turning
clockwise.
8. Replace the dust cover cap on
headlamps.
9. Reinstall the wheel well cover
access port cap and secure by
installing the screw.
To replace one of these bulbs:
1. Locate the fog lamp assembly
under the front fascia.
2. Remove the bulb from the lamp
assembly by turning it
counterclockwise and pulling
straight out.
3. Disconnect the electrical
connector.
4. Reverse Steps 2 and 3 for
assembly.
1. Stop/Tail/Turn Signal/
Sidemarker Lamp
2. Auxiliary Taillamp
3. Back-up Lamp
To replace one of these lamps:
1. Open the liftgate. See
.