Specifications; Components And Controls; Instructions For Putting Into Use; Safety Information - Harbor Freight Tools 67378 Set Up And Operating Instructions Manual

SpecificationS

Electrical Input 6 AA Batteries (not included)
Earphone Jack 3.5 mm mini-jack Socket
Sensitivity Adjuster;
Metal-Type Discriminator;
All-Metal Indicator; Tone
Functions Adjuster; Volume Control;
Target Locator; Low Battery
Indicator; Auto Ground
Balance; Mode Selector
unpacKing
When unpacking, make sure the item
is intact and undamaged. If any parts
are missing or broken, call Harbor Freight
Tools at 1-800-444-3353.
inStructionS for
putting into uSe
read the entire important

SafetY information

section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
from acciDental
operation:
turn the power Switch of the
tool off and remove the
batteries before assembling
or making any adjustments to
the tool.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
SKU 67378 for technical questions, please call 1-800-444-3353.
to preVent
SeriouS injurY
components & controls
Earphone Jack
Battery
Cover
(26)
View Meter (36)
Upper Leg (15)
Cable (25)
Lock Nut (20)
Lower Leg (18)
Coil Pivot (21)
Knob Bolt (22)
Search Coil (23)
figure 1
Arm Support (13)
Handle (8/10)
Control Box
Page 5