Honda 2005 NSX Owner's Manual page 70

Main Menu Table of Contents
Removable Roof Panel
If the wind noise is unpleasant while
you are driving with the roof panel
removed, you can reduce the noise
by inserting a plug in the hole
located at each side of the rear roof
pillar. These plugs are stored in the
glove box.
PLUG
Do not use any plugs other than the
ones that came with your vehicle.
Other objects may damage the
mechanism in the roof pillar, causing
the roof panel mechanism to jam or
to not latch the roof properly.
68
Installing
Because it is stored above the engine
compartment, the roof panel can get
hot while driving. Allow it to cool
down for several minutes before
attempting to remove it from the
roof holder.
1. Open both windows.
2. Turn off the engine and set the
parking brake.
3. Remove the plugs from the rear
pillars.
4. Open the rear window
(see page 66 ).
5. Open the roof cover by pulling up
the release lever. Unsnap the hook
from the window frame and use it
to hold up the roof cover.
6. Remove the roof from the holder
by pulling it up slightly, then back.
Make sure the roof panel release
7.
levers are in the unlocked (down)
position.