Advanced Wireless - D-Link DHP-306AV User Manual

Powerline av network adapter
Hide thumbs Also See for DHP-306AV:
Table of Contents

Advertisement

Section 3 - Configuration
Transmit Power:
Sets the transmit power of the antennas.
Note: Transmit power is regulated by international
standard. Users are forbidden to change its maximum limit.
Beacon Period:
Beacons are packets sent by an access point to synchronize
a wireless network. Specify a value. 100 is the default
setting and is recommended.
DTIM Interval:
(Delivery Traffic Indication Message) 1 is the default setting.
A DTIM is a countdown informing clients of the next window
for listening to broadcast and multicast messages.
RTS Threshold:
This value should remain at its default setting of 2346.
If inconsistent data flow is a problem, only a minor
modification should be made.
Fragmentation
The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding
Threshold:
the 2346 byte setting will be fragmented before transmission. 2346 is the default setting.
WMM Enable:
WMM is a Quality of Service (QoS) system for your wireless network. Enabling this feature will improve the quality of video
and voice applications for your wireless clients.
Short GI:
Check this box to reduce the guard interval time therefore increasing the data capacity. However, this setting less reliable
and may create higher data loss.
IGMP Snooping:
Select this checkbox to enable IGMP snooping. IGMP snooping is a layer 2 feature which enables the device to learn Multicast
group membership based on IGMP messages passing through the built-in switch. Because the switch learns the IGMP
messages and knows which clients are involved in the multicast group membership, it is able to forward multicast traffic only
to the ports that requested for it (based on their membership).
WLAN Partition:
Select this checkbox to enable WLAN partition. If this feature is enabled, then there is no barrier between communication
among wireless stations connecting to the Access Point. If this is disabled, wireless clients are not allowed to exchange data
through the Access Point.
D-Link DHP-W307AV User Manual

Advanced Wireless

38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dhp-307av

Table of Contents