Wireless Setup - D-Link DHP-306AV User Manual

Section 3 - Configuration
Enable Wireless:
Check this box to enable the wireless function. If
you would prefer not to use wireless, uncheck the
box to disable all the wireless functions. You may
also set up a specific time range (schedule). Select
a schedule from the drop-down menu or click Add
New Schedule to create a new schedule.
Wireless Network
When you are browsing for available wireless
Name:
networks, this is the name that will appear in the
list (unless Visibility Status is set to Invisible, see
below). This name is also referred to as the SSID.
For security purposes, changing the default network
name is highly recommended.
Enable Auto
The Auto Channel Scan setting can be selected to
Channel Scan:
allow the DHP-W306AV to select the channel with
the least amount of interference (during boot-up).
Wireless
Indicates the channel setting for the DHP-W306AV.
Channel:
The channel can be changed to fit the channel setting
for an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan,
this option will be grayed out.
802.11 Mode:
Select one of the following:
802.11n Only - Select if you are only using 802.11n wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
D-Link DHP-W307AV User Manual

Wireless Setup

33