Cisco Nexus 7000 Design Manual page 27

with suitable policies. The server administrators can monitor and manage the resources effectively with
the network details provided in the vCenter plug-in.
1000v vCenter Plug-in.
Figure 8
FlexPod Implementation and Design
This section describes the implementation details of FlexPod design with NetApp clustered Data
ONTAP and Data ONTAP operating in 7-mode.
Physical Build
Hardware and Software Revisions
Table 1
note that Cisco, NetApp, and VMware have interoperability matrixes that should be referenced to
determine support for any specific implementation of FlexPod. For more information on Interoperability
Matrix, see the following links:
•
•
Cisco Nexus 1000v vCenter Plug-in Example
describes the hardware and software versions used during solution validation. It is important to
NetApp Interoperability Matrix Tool
http://support.netapp.com/matrix/
Cisco UCS Hardware and Software Interoperability Tool
Figure 8 shows a screen sample in Cisco Nexus
VMware vSphere 5.1 on FlexPod with Nexus 7000 Using FCoE
FlexPod Implementation and Design
27