Status; Camera Status - D-Link mydlink DNR-322L User Manual

Section 3 - Configuration
This page displays the connection and recording status of your cameras.
Connection Shows the camera connection status. The user can click Connect

Status:

or Disconnect to change the connection status.
Recording Shows the recording schedule and current recording status of
Status: the cameras. Please note that if the camera is disconnected, the
recording may continue but will produce blank video.
Frame Rate: Displays the frame rate of the camera.
Bit Rate: Displays the transmission bit rate of the camera.
Note: If the Frame Rate or Bit Rate is too low, please check the
network configuration between cameras and NVR. If the bit rate
is too high, it will cause the Live Video display to slow down or
lag. If this is the case, please modify the quality or bitrate setting
in the camera web GUI accordingly.
Disk Status: Shows the hard drive space and estimated remaining recording
time status.
Note: The recording time information is estimated by the current
bit rate. This may change each time a user refreshes this page.
D-Link DNR-322L User Manual
Status
Camera Status
56