Transporting/Storage - Honda Outboard Motor BF50 Owner's Manual

10. TRANSPORTING/STORAGE
1. Disconnect the fuel line and install the cap on the engine fuel inlet. Firmly
close the fuel cap vent knob.
FUEL LINE CONNECTOR
FUEL INLET
r-----TdA
CAP
'I f\--
2. Loosen the carburetor drain screw, and drain the gasoline into a suitable
container. After draining, retighten the drain screw.
m Be careful not to spill fuel. Fuel vapor or spilled fuel may ignite.
CAUTION: In cold weather, to prevent ice from forming inside the water
pump, pull the recoil starter several times to flush the water out.
DRAIN'SCREW
36