Using The Built-In Needle Threader - Singer S16 Instruction Manual

Using the Built in Needle Threader
z
x
c
w
v
b
q
e
r
t
Step
z Lower the presser foot. Press the Up/Down needle
button twice to raise the needle to its highest
position. Turn the power switch off.
Push down the needle threader lever q as far as it
will go.
Step
x Turn the lever q in the direction of the arrow to
insert the hook into the needle eye.
The hook r comes out through the needle eye
as illustrated.
Step
c Holding the thread with both hands, draw the
thread along the thread path w.
Then hook the thread around the guide e.
Step
v Draw the thread under the hook r.
Hold the end of thread with your hand while pulling
up the thread lightly in the direction of arrow.
Step
b Turn the lever in the direction of the arrow as
shown, drawing the thread loop t through the
needle.
Release the threader lever slowly. Then pull the
thread loop t to the right.
13