Installing The Optical Drive; Removing The Hard Drive - Dell Precision T5610 Owner's Manual

Installing the Optical Drive

1. Lift the release latch, and slide the optical-drive cage inside the compartment.
2. Press on the clasp to release the latch and thread the cables into the holder.
3. Connect the power cable to the back of the optical drive.
4. Connect the data cable to the back of the optical drive.
5. Install the cover.
6. Follow the procedures in

Removing the Hard Drive

1. Follow the procedures in
2. Remove the cover.
3. Disconnect the power supply and data cables from the hard drive.
4. Press in on the latches on either side of the hard-drive bracket.
After Working Inside Your Computer .
Before Working Inside Your Computer .
17