Tidying Cables - LG LM6200 Series Owner's Manual

CAUTION
Disconnect the power first, and then move
y y
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
y y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
y y
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
y y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
Use the screws that are listed on the VESA
y y
standard screw specifications.
The wall mount kit includes an installation
y y
manual and necessary parts.
The wall mount bracket is optional. You can
y y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y y
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
y y
supplied with the wall mount.
When attaching a third-party wall mounting
y y
bracket to the TV, insert the wall mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG wall
mounting bracket.
Wall Mount Inner Spacer
ASSEMBLING AND PREPARING

Tidying cables

1
Gather and bind the cables with the cable
holder.
Cable holder
2
Fix the cable management clip firmly to the TV.
Cable management clip
CAUTION
Do not move the TV by holding the cable
y y
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
19