Connecting The Frame To The Power Supply; Connecting The Frame To A Computer; Changing And Adding Pictures; View Contents On Your Memory Card - Smartparts SP-DPF84BW User Manual

b. Connecting the frame to the Power Supply
Use only the supplied AC power supply. Make sure that the
frame's power switch is in the OFF position before you
connect or disconnect the power supply.
Plug the AC power supply only into a 120 VAC 60 Hz (regular
North American) wall outlets – connecting the frame to a
different power source or wall outlet will harm the unit and
void the warranty.
c. Connecting the frame to your computer (optional)
Use the supplied USB cable and connect the frame to your
computer.
The Hardware wizard will show that you connected a new
device and will recognize it as a disk drive.
No software needs to be installed. Just follow the start menu
and click on "My Computer" – your memory card will be listed
under "Devices with Removable Storage". You can open it by
double clicking on the icon representing your memory card.
Most likely this device will be named after the manufacturer of
your memory card.
There will be no data available as long as you do not insert a
memory card into your frame.
Once you insert a memory card you will see the respective
drive on your computer and you will be able to access your
pictures and the frame can act as a regular card reader.
Please note that the Digital Picture Frame will not display
pictures while it is connected to a computer. Please
disconnect the USB cable to view pictures.
www.smartpartsproducts.com Page 6