Using The Bluetooth Mobile Phone; Using Bluetooth ® Devices; Preparation - JVC KD-R328 Instructions Manual

Using Bluetooth ® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied)
to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 9)
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth
device.

Preparation

1
Register (pair) a Bluetooth device with KS-BTA100.
Refer to the instructions manual supplied with KS-BTA100.
2
Change the <SRC SELECT> settings of this unit.
[Hold]

Using the Bluetooth mobile phone

(Low) (High)
KS-BTA100
Microphone
Using the Bluetooth audio device
1
(CD receiver)
[Press] Selects track.
[Hold] Fast-forwards or reverses the track.
About microphone volume:
• When you turn off the power of the CD receiver, the volume level changes to Normal.
14 ENGLISH
Adjusting the microphone volume
Volume level: High/ Normal (initial)/ Low
• Receiving a call
• Making a call
• Switching between handsfree and phone
• Ends/rejects call
• Voice dialing
[Hold]
(< 5 seconds)
2
] "BT AUDIO"
If playback does not start, operate the Bluetooth
audio player to start playback.
] <SRC SELECT> ] <R-AUX> ]
<BT ADAPTER>
When a call comes in...
Making a call to the last connected number from
your phone.
While talking...
Voice dialing is available only when the connected
mobile phone has the voice recognition system. To
use this, speak the name you want to call clearly.