OnStar FMV Mirror Installation Insrtuctions page 12

This document was carefully
designed to explain and help
simplify the installation process
for the revolutionary OnStar
For My Vehicle (FMV) Mirror.
Please pay close attention to
the tools specified and steps
outlined in order to ensure proper
Installation and activation, as well
as to avoid windshield damage.
On Star'FMV
HAZARD WARNING INFORMATION
BETAPRIME 5500 SA
The Dow Chem1cal Company
2030 Willard H. Dow Center
M1dland. Ml 48674
KEEP OUT OF REACH OF CHILDREN
DANGERI EXTREMELY FLAMMABLE LIQUID AND VAPOR. CAUSES
EYE IRRITATION. MAY CAUSE ALLERGIC SKIN REACTION OR
IRRITATION. MAY BE HARMFUL IF INHALED. MAY CAUSE
RESPIRATORY TRACT ALLERGIC REACTION OR IRRITATION. MAY
CAUSE CENTRAL NERVOUS SYSTEM EFFECTS. MAY BE HARMFUL
IF SWALLOWED. ELIMINATE IGNITION SOURCES DO NOT USE IN A
CONFINED SPACE; USE WITH ADEQUATE VENTILATION.
May cause moderate eye irritation. May cause moderate corneal injury
Vapor may cause eye irritation. Prolonged skin contact may cause
moderate skin irritation. Skin contact with isocyanates may play a
role in respiratory tract allergic reaction. A component in this mixture
may cause an allergic respiratory reaction. Vapor concentrations
could be hazardous on a single exposure. Avoid inhaling vapor. Open
veh1cle doors and if necessary, also use other means to ensure fresh
air entry during application and drying. If eye irritation, headaches. or
dizziness are experienced. increase fresh air or leave the area
INGREDIENTS: METHYL ETHYL KETONE (78-93-3). CARBON BLACK
(1333-86-4), ISOPHORONE DIISOCYANATE (4098-71-9)
Before using this product, consult your employer. if applicable,
and read the Material Safety Data Sheet (MSDS) for additional
mformation.
Scotch-Weld ' ' Urethane Adhes1ve DP604 NS. Black (Part A and
Part B)
3M - Industrial Adhesives and Tapes Division
3M Center
St. Paul. MN 55144-1000
KEEP OUT OF REACH OF CHILDREN.
DANGERI MAY CAUSE AN ALLERGIC SKIN AND RESPIJ:.<ATORY
REACTION. MAY CAUSE SEVERE EYE. SKIN NOSE AND THROAT
IRRITATION.
Persons prev1ously sensitized to isocyanates should avoid product
use. Do not inhale vapor. Vapors released during curing may cause
eye irritation. Do n·ot inhale dust from cutting, grinding or sanding
of cured product Use only with adequate ventilation by opening
vehicle doors. and if necessary, also use other means to ensure fresh
air entry during application and drying. If ventilation is not adequate,
use appropriate respiratory protection. Do not get in eyes. on skin or
clothing. Avoid eye and skin contact with dusts from cutting. grinding
or sandmg of cured product Keep container closed when not in use.
Wash thoroughly after handling. Do not ingest
INGREDIENTS: Polyether Polyol (9082-00-2); polyurethane
prepolymer (67837-35-8); dicyclohexylmethane-4,4'-diisocyanate
(5124-30-1); diethyltoluenediamine (68479-98-1); propoxylated
trimethylolpropane (25723-16-4); 4,4'- diphenylmethane diisocyanate
(101-68-8);
1,1'-
diphenylmethane diisocyanate polymer (39310-05-9);
and m-xylene-alpha. alpha'-diamine (1477-55-0).
Before using this product, consult your employer. if applicable.
and read the Material Safety Data Sheet (MSDS) for additional
information.
WEBCOL/CURITY " 70% Alcohol Prep Pads
Tyco Healthcare/Kendall
15 Hampshire Street
Mansfield. MA 02048
KEEP OUT OF REACH OF CHILDREN
DANGER
1
FLAMMABLE
Liquid, mist or vapor will cause eye Irritation and possible corneal
damage. Prolonged or repeated contact may cause skin irritation or
dermatitis. Exposure to vapor may cause irritation to nose. throat.
respiratory tract, and central nervous system depression
INGREDIENTS: Isopropyl alcohol (67-63-0)
Before using this product. consult your employer. if applicable.
and read the Material Safety Data Sheet (MSDS) for additional
information.
FIRST AID
Eye Contact: Immediately flush eyes with large amounts of
water; if present, remove contact lenses after the first five
minutes, then continue flushing eyes for at least fifteen (15)
minutes. Obtain medical attention without delay, preferably
from an ophthalmologist. Skin Contact: Remove material from
skin immediately by washing with soap and plenty of water.
Seek medical attention if irritation persists. Inhalation: Move
person to fresh air. If not breathing, give artificial respiration.
If breathing difficulty is experienced, contact physician
immediately. Ingestion: If swallowed, seek medical attention.
Do not induce vomiting unless directed to do so by medical
personnel.
See MSDS for emergency contact information.
v.3