Installing The Wifi-Switch Board; Removing The System Board - Dell Latitude E6530 Owner's Manual

Installing the WiFi-Switch Board

1. Fix the adhesive tape on the back of the WiFi-switch board and place the board in its slot.
2. Tighten the screw to secure the WiFi-switch board.
3. Connect the WiFi-switch board cable to the system board.
4. Install:
a) palmrest
b) keyboard
c) keyboard trim
d) optical drive
e) hard drive
f) base cover
g) battery
5. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove:
a) battery
b) base cover
c) hard drive
d) optical drive
e) bluetooth card
f) keyboard trim
g) keyboard
h) WLAN card
i) modem card
j) heat sink
k) processor
l) palmrest
m) ExpressCard cage
3. Disconnect the power-connector cable from the bottom side of the system board.
After Working Inside Your Computer .
Before Working Inside Your Computer .
41