Replacing The Display Assembly; Procedure; Postrequisites - Dell XPS 9530 Owner's Manual

Replacing the Display Assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1 Slide the palm-rest assembly on the display assembly.
2 Align the screw holes on the display hinges with the screw holes on the palm-rest
assembly.
3 Replace the screws that secure the display hinges to the palm-rest assembly.
4 Press down on the palm rest assembly to close the display.
5 Route the touch-panel cable, display cable, and camera cable through the routing
guides.
6 Connect the touch-panel cable and display cable to the system board.
7 Connect the camera cable to I/O board.
8
Connect the antenna cables to the wireless card.
9 Adhere the Mylar to the wireless card.

Postrequisites

1 Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.
58
| Replacing the Display Assembly