Replacing The Base-Cover Assembly; Procedure - Dell XPS 9530 Owner's Manual

Replacing the Base-Cover Assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1 Place the base-cover assembly on the palm-rest assembly and snap it into place.
2 Replace the screws that secure the base cover to the palm-rest assembly.
3 Turn the system badge over and snap it in place.
4
Turn the computer over, open the display, and turn on the computer.
12
| Replacing the Base-Cover Assembly