Download Print this page

Vendor KAMN-23 Owner's Manual

Electric fireplace

Advertisement

Quick Links

Meijer.com
ELECTRIC FIREPLACE
OWNERS MANUAL
Model KAMN-23
Only use this heater as described in this manual. Any other use is not recommended
by the manufacturer, and may cause fire, electric shock, or other personal injury.
WARNING! Read and understand this entire owner's manual, including all safety
information, before plugging in or using this product. Failure to do so could result in fire,
electric shock, serious personal injury, or death.
WARNING! INDOOR use only! NEVER use this heater outdoors!
SAVE THESE INSTRUCTIONS!
CAUTION! Keep this owner's manual for future reference. If you sell or give this product
away, make sure this manual accompanies this product.

Advertisement

loading

Summary of Contents for Vendor KAMN-23

  • Page 1 Meijer.com ELECTRIC FIREPLACE OWNERS MANUAL Model KAMN-23 Only use this heater as described in this manual. Any other use is not recommended by the manufacturer, and may cause fire, electric shock, or other personal injury. WARNING! Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product.
  • Page 2: Important Safety Information

    Meijer.com IMPORTANT SAFETY INFORMATION! WARNING  ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater. ...
  • Page 3 Meijer.com WARNING  Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!  ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace.  ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet. ...
  • Page 4 Meijer.com PREPARATION A complete electric fireplace heater should consist of two parts; the wooden mantle and the fireplace heater. Each is packed in a separate carton. Always use the fireplace heater with the wooden mantle. Remove all parts from the carton and place them on a clean, soft, and dry surface. Check the parts list to make sure nothing is missing.
  • Page 5 Meijer.com ASSEMBLY STEP 1. Insert the wood dowel (C) into the back edge of side panels (2L/2R). Press rear panels (3L/3R) and side panels together so dowels go into holes in rear panels. Thread bolts (A) through washers (B) and connectors on side panels and into holes in rear panels.
  • Page 6 Meijer.com STEP 3. Insert wood dowel (C) into holes in each end of shelf (4). Press shelf and side panels together so dowels go into holes in side panels. Thread bolts (A) through washers (B) and connectors on shelf and into holes in side panels. Secure with Phillips screwdriver.
  • Page 7 Meijer.com STEP 5. Thread wood screws (D) through holes in cross panel (6) and into holes in back edge of mantel assembly. Secure with Phillips screwdriver. Tighten all bolts and screws. ANT-TIP SAFETY KIT INSTALLATION 1. Attach one bracket (G) to the wall with the long screw (E).
  • Page 8: Limited Warranty

    This product is not intended to be used as a primary heat source. VENDOR DEVELOPMENT GROUP, INC.(HEREAFTER, VDG), ITS DIRECTORS, OFFICERS, OR AGENTS, WILL NOT BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNITIVE,...