Installing The System Board - Dell Latitude E5540 Owner's Manual

5. Perform the following steps:
a) Remove the screws that secure the system board on the computer.
b) Lift and remove the system board from the computer.

Installing the System Board

1. Align the system board into its original position on the computer.
2. Replace and tighten the screws to secure the system board to the computer.
3. Connect the following cables:
a) I/O board cable
b) status-light board cable
4. Turn over the computer and connect:
a) coin-cell battery cable
b) power-connector cable
c) speaker cable
5. Install:
a) ExpressCard cage
b) system fan
c) palmrest
d) display hinge
e) WLAN card
f) hard-drive cage
g) hard drive
h) optical drive
i) memory
j) keyboard
k) keyboard trim
l) base cover
m) battery
n) SD card
6. Follow the procedures in After Working Inside Your Computer.
30