Dell NX3600 Deployment Manual page 28

3. Click Install Certificate.
The Certificate Import Wizard is displayed.
4. Click Next.
The Certificate Store screen is displayed.
5. Verify that Automatically select the certificate store based on the type of certificate is selected and click Next.
The Completing the Certificate Import Wizard screen is displayed.
6. Click Finish.
A message prompts you that the certificate is imported successfully.
7. Click OK.
The certificate window is displayed.
8. In the Certificate window, click OK.
9. Type the username and password and click Log in.
NOTE: Use admin as the username. The default password is Stor@ge!. You can change the password later.
NOTE: If the Start Configuration page does not open automatically, click Cluster Management →
Maintenance → Start Configuration Wizard.
28