Download Print this page

Denon IN-Command AVR-X4000 Specifications page 2

In-command series integrated network av receiver, 7.2-channel 4k ultra hd & 3d pass-through networking home theater receiver with apple airplay and multi-zone video
Hide thumbs Also See for IN-Command AVR-X4000:

Advertisement

Convenient HDMI input on the front panel
4K Ultra HD (3840x2160) support (Video pass-through, video upscaling)
Main Specifications
Power amplifier section
Rated output
*THD figures are power amp stage values.
Front L/R
125 W + 125 W
(8 Ω/ohms, 20 Hz - 20 kHz, THD 0.05 %)
165 W + 165 W
(6 Ω/ohms, 1 kHz, THD 0.7%)
Center
125 W
(8 Ω/ohms, 20 Hz - 20 kHz, THD 0.05 %)
165 W
(6 Ω/ohms, 1 kHz, THD 0.7%)
Surround L/R
125 W + 125 W
(8 Ω/ohms, 20 Hz - 20 kHz, THD 0.05 %)
165 W + 165 W
(6 Ω/ohms, 1 kHz, THD 0.7%)
Surround Back L/R
125 W + 125 W
(Front height L/R)
(8 Ω/ohms, 20 Hz - 20 kHz, THD 0.05 %)
(Front wide L/R)
165 W + 165 W
(6 Ω/ohms, 1 kHz, THD 0.7%)
Our Integration Partners:
*Design and specifications are subject to change without notice. *"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. *DTS is a registered trademark and the DTS logos, Symbol and DTS-HD are trademarks of DTS, Inc. *The terms
HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. *Windows Media and the Windows logo are trademarks or registered trade-
marks of Microsoft Corporation in the United States and/or other countries. *NSV is a registered trademark of Analog Devices, Inc. *"Made for iPod," and "Made for iPhone," mean that an electronic accessory has been designed to connect specifically to iPod,
or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this acces-
sory with iPod, iPhone, or iPad may affect wireless performance. AirPlay, iPad, iPhone, iPod, iPod touch, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. *HD Radio Technology manufactured under license from iBiquity
Digital Corporation. U.S. and Foreign Patents. HD Radio ™ and the HD, HD Radio, and "Arc" logos are proprietary trademarks of iBiquity Digital Corp.
Denon Electronics (USA), LLC.
D&M Canada
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500
usa.denon.com
ca.denon.com
AirPlay lets you wirelessly stream music from your iPod touch,
iPhone or iPad
New intuitive GUI (Graphical User Interface)
Preamplifier section
Input sensitivity/impedance
200 mV / 47 kΩ/kohms
Frequency response
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N Ratio
102 dB (IHF-A weighted, DIRECT mode)
FM section
Tuning frequency range
87.5 - 107.9 MHz
AM section
Tuning frequency range
530 - 1710 kHz
General
Power supply
AC 120 V , 60 Hz
Power consumption
670 W
(Standby 0.1 W, CEC standby 0.5 W)
Dimensions (W x H x D)
17 3/32" x 6 67/64" x 14 59/64"
434 x 167 x 379 mm
Weight
27 lbs 20 oz, 12.3 kg
D&M Holdings Inc.
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
New Denon Remote App for iOS and Android devices
Multi-room audio (up to 3 zones, 3 sources)
Ports
In
HDMI (incl. Front 1)
Video (component)
Video (composite) (incl. Front 1)
Analog audio (incl. Front 1)
Digital audio (optical)
Digital audio (coaxial)
Out
HDMI monitor
Video (component)
Video (composite)
Audio preout (Zone2 L/R, Zone3 L/R)
Audio preout (11 ch)
Audio preout (subwoofer)
Audio lineout (L/R)
Phones
DenonLink HD
Others
Network (Ethernet)
USB
FM tuner antenna
AM tuner antenna
Setup mic jack
Remote Control (in/out)
Trigger out (DC 12 V 150 mA MAX)
RS-232C
20350313A
1-855-MY.DENON
Call for Assistance: 9:00AM to 8:00PM M-F E.S.T.
For frequently asked questions please visit www.usa.denon.com/FAQ
7
2
4
7 (Phono 1)
2
2
3 (1 Zone2)
1
3
2
1
2
1
1
1
1
1
1
1
1
1/1
2
1
1-855-693-3666

Advertisement

loading
Need help?

Need help?

Do you have a question about the IN-Command AVR-X4000 and is the answer not in the manual?