Table of Contents
Advertisement
Section
Available accessories
03
Switching the SIRIUS display
1 Press
/DISP.
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
! The play time is displayed during Instant
Replay mode. Refer to Using the Instant
Replay function on this page.
! Play time display indicates the time in-
verted from the live broadcast. The play
time is displayed as a negative number.
Displaying the Radio ID
1 Turn LEVER to select CH 000.
! To select CH 000, set the channel select set-
ting to Channel number. About the channel
select setting, refer to Channel mode (channel
select mode setting) on this page.
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to a SIRIUS tuner or select a channel.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1
Press
(list).
Preset screen is displayed.
2
Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
24
En
3
Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing
or
or turning LEVER.
Function and operation
1
Press M.C. to display the main menu.
2
Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by num-
ber, channels in any category can be selected. Se-
lect by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select set-
ting)—Category (channel category select set-
ting)
Game alert (game alert setting)
Available accessories
This system can alert you when games involving
your favorite teams are about to start. To use this
function you need to set up a game alert for the
teams in advance.
! To use this function, a Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required.
! To use this function, a SIRIUS plug-and-play
unit with a Game Alert Function is required.
! For details, refer to the SIRIUS plug-and-play
unit's manuals.
! You can also operate this function when a SIR-
PNR2 is connected to this unit.
! The Game Alert function is on at the default
setting.
! Once you select the teams, you need to turn
the Game Alert function on.
1 Press M.C. to turn the Game Alert on or off.
! When a game of the selected team is about to
start (or is currently playing) on a different sta-
tion, Game alert info is displayed. Press and
hold M.C. to switch to that station, and you
can listen to that game.
Team setting (team setting)
1 Press M.C. to select the function.
2 Turn M.C. to select a desired league.
3 Turn M.C. to select a desired team.
4 Press M.C. to store the selected team in mem-
ory.
The game alert function is activated for that
team.
5 Repeat these steps to select other teams.
! When FULL is displayed, additional teams
cannot be selected. In this case, first delete
a selected team and then try again.
Game info (game information)
If any games of the selected teams are currently
playing, you can display information on the games
and tune in to the broadcast channel.
You can display information on the games while
enjoying the sound from the station you are cur-
rently tuned in to. You can also tune in to the
broadcast channel when you wish to.
1 Press M.C. to select the function.
2 Turn M.C. to select a game.
! The game score will be updated automati-
cally.
3 Press M.C. to switch to the other station and
listen to the game.
! If you have not selected any teams, NOT SET is
displayed.
! When games involving your favorite teams are
not currently playing, NO GAME is displayed.
Pause (pause)
During the Instant Replay mode, you can select
Pause (pause). Refer to Using the Instant Replay
function on this page.
1 Press M.C. to pause or resume.
Selecting a channel from a
channel category
1
Select the channel select settings to
Category.
Refer to Channel mode (channel select mode
setting) on this page.
2
Push
or
to select the desired
channel category.
3
Turn LEVER to select the desired channel
from the selected channel category.
Using the Instant Replay function
The following functions can be operated in In-
stant Replay mode.
Hide quick links:
Advertisement
Table of Contents
