HDD Installation
This is a guide for installation of HDD into the rack. No screw needed
TizzBird – SMART MEDIA PLAYER
Before install the HDD into the rack, please check the
four bumps on the rack. There are two A bumps on the
side, and two B bumps on the bottom.
Find out the side holes of HDD, and assemble them with
two A bumps. Insert the HDD first on the side. Then
assemble the bottom holes of HDD with two B
bumps.
Insert the rack smoothly into the main unit. Please make
sure that handle of rack is open status, before insertion.
Push the rack until it reaches the end of the unit's inside.
Close the handle of the rack after insertion.
10