Advertisement
FAQ – Jabra T5330 Multiuse
I can hear myself when I talk
•
Your microphone volume level is probably too high - see section 3.10 in the user
manual.
No indication on the headset when it's on?
•
When the headset is out of the cradle, the indicator on the headset will flash
green as long as there is a voice link between the cradle and the headset. A short
activation of the answer/end button on the headset will terminate the voice link.
The indicator on the headset will then turn off. Another short activation of the
answer/end button will establish the voice link again.
I hear a low noise in the headset when there is no call?
•
Make sure the voice link between the base and the headset is off (short activation
of the answer/end button).
I hear a low noise in the headset when there is silence on the other
end?
•
You probably have set your headset to one of the highest volume settings. If
your phone has a volume button, turn this up a bit and turn down the headset's
volume a little.
I have changed desks at work. Is it possible to use my headset with
another base?
•
Yes, this is possible. The headset only needs to be paired to the new base. Follow
the procedure described in section 7 in the user manual.
Is the Jabra T5330 Multiuse completely safe to use?
•
Yes. The high-pitched squeal of a fax machine etc. can be harmful. The Jabra
T5330 Multiuse protects against these loud sounds. Many acoustic experts define
acoustic shock as exposure to levels in excess of 135 dB SPL, but even lower levels
can damage the ears. Therefore, the Jabra T5330 Multiuse cuts off sounds at 118
dB SPL (RMS).
www.jabra.com
Advertisement
