Programming The Power Windows - Chevrolet SSR 2004 Owner's Manual

Power Windows
See Center Console Switchbank on page 3-17 for more
information on location.
When you open a door, the window will automatically
lower about a half inch. When the door is closed,
the window will then close. If you wish to re-open the
window once it's closed, press and hold the bottom
of the power window switch to lower the window. Press
and hold the top of the switch with the up arrow to
raise the window.
The ignition must be in ACCESSORY or RUN for the
window switches to work.
2-10
ofrecido por www.electromanuales.com
The driver's and
passenger's power window
switches are located on
the center console
switchbank.
Express Down Window
Both driver's and passenger's window switches have
the express-down feature. Tap the driver's or
passenger's power window switch and immediately
release. The window will lower completely. To stop the
express-down feature from lowering the window
completely, simply tap the switch again or press the
lock button on the remote keyless entry transmitter. See
Remote Keyless Entry System Operation on page 2-4
for more information.
To close the window, press and hold the up arrow.

Programming the Power Windows

If the battery on your vehicle has been recharged,
disconnected, or is not working properly, you will need
to reprogram the power windows for them to work
properly. Before reprogramming, you will need to replace
or recharge your vehicle's battery.
To program the windows, follow these steps:
1. With the ignition in ACCESSORY or RUN, close
the doors.
2. Fully lower the windows using the driver's power
window switches. Then raise the windows
completely.
The windows are now programmed.