Engine Cover - Chevrolet SSR 2004 Owner's Manual

Engine Cover

Your vehicle has a removable engine cover.
To remove the engine cover do the following:
1. Remove the engine cover insert if your vehicle has
one. See "Engine Cover Insert" following for
instructions.
2. Unscrew the three bolts from the engine and lift off
the cover.
3. To reinstall the engine cover, reverse the steps.
5-18
ofrecido por www.electromanuales.com
Engine Cover Insert
The engine cover insert must be removed to access the
bolts that secure the engine cover to the vehicle.
Use the following procedure to remove the engine cover
insert:
1. Using a flat-bladed tool, lift up on the front outboard
edges of the engine cover insert to release the clips.
2. Slide the engine cover insert rearward to release the
insert from the two hooks located at the rear
outboard edges of the insert.
3. Lift off the engine cover insert.
4. To reinstall the insert, reverse the steps.
Your vehicle may have an
engine cover insert.