Restoring The Factory Default State; Troubleshooting; Power Problems - Getac PS535F User Manual

7.2 Restoring the Factory Default State

In some cases, you may need to restore your Pocket PC to the factory default
state by clearing the memory (RAM) from your Pocket PC. For example, you
should clear the memory:
When your Pocket PC does not respond after being reset.

When you forget your password.

Clearing the memory means all data you have entered in RAM, including all
files, system settings and additional programs you have installed, will be erased.
1. Press and hold the upper right button (
2. Slide the ON/OFF switch off and then slide it on again.
3. Release the upper right button (
now‖ appears on screen.

7.3 Troubleshooting

Power Problems

Power does not turn on when using battery power
The remaining battery power may be too low to run your Pocket PC.

Connect the AC charger to your Pocket PC and to external AC power. Then,
turn on your Pocket PC.
) of your Pocket PC.
) of your Pocket PC after ―Clean boot
65