Grass Bag Cleaning And Replacement; Engine Maintenance - Honda HRX217HMA Owner's Manual

Honda lawn mower owner's manual
Hide thumbs Also See for HRX217HMA:
Table of Contents

Advertisement

GRASS BAG CLEANING AND REPLACEMENT

Grass Bag Cleaning
Wash the bag with a garden hose and allow it to dry completely before
use; a wet bag will clog quickly.
Grass Bag Replacement
Replace a worn or damaged bag with a Honda replacement bag or its
equivalent (page 19).
Bag Removal
1. Unclip the plastic edges of the
bag from the frame.
2. Remove the bag from the
frame.
Bag Installation
1. Insert the bag frame into the
bag, as shown.
2. Clip the plastic edges of the
bag onto the frame, as shown.

ENGINE MAINTENANCE

Engine Oil Level Check
1. Unscrew and remove the filler
cap/dipstick and wipe it clean.
Insert and remove the
dipstick without screwing it
into the filler neck. Check
the oil level shown on the
dipstick.
2. If the oil level is low, add
oil to reach the upper
limit mark on the
dipstick. Do not overfill.
If the engine is
overfilled, the excess oil
may get transferred to
the air cleaner housing
and air cleaner filter.
NOTICE
Running the engine with
a low oil level can cause
engine damage.
3. Screw in the filler
cap/dipstick securely.
BAG
PLASTIC EDGE
FRAME
PLASTIC
EDGE
FILLER
CAP/DIPSTICK
UPPER
LIMIT
LOWER
LIMIT
Engine Oil
Recommendations
Oil is a major factor affecting
performance and service life.
Use 4-stroke automotive
detergent oil.
Always change the oil in
accordance with the
maintenance schedule on
page 9.
SAE 10W-30 is recommended
for general use. Other viscosities shown in the chart may be used
when the average temperature in your area is within the
recommended range.
The SAE oil viscosity and service classification are in the API label on
the oil container. Honda recommends API SERVICE category SJ or
later oil with the ILSAC "starburst" certification mark displayed on the
container.
Engine Oil Change
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Turn the fuel valve OFF (page 8). This will reduce the possibility of
fuel leakage.
2. Wipe the oil filler area clean, then remove the oil filler cap/dipstick.
3. Place a suitable
container next to the
mower to catch the
used oil, then tilt the
mower on its right
side.
The used oil will
drain through the
filler neck. Allow the
oil to drain
completely.
Please dispose of used motor oil and the containers in a manner
that is compatible with the environment. We suggest you take it in
a sealed container to your local recycling center or service station
for reclamation. Do not throw it in the trash, pour it on the ground,
or pour it down a drain.
4. Fill with the
recommended oil.
Do not overfill.
Allow a couple of
minutes for the oil
to settle in the
engine, then
measure the oil
level as shown
previously.
NOTICE
Using nondetergent oil can shorten the engine's service life, and
using 2-stroke oil can damage the engine.
–20
0
20
40
60
80
100
0
F
–30
–20 –10
0
10
20
30
40
0
C
AMBIENT TEMPERATURE
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hrx217hxa

Table of Contents