Farenheit Mobile Video System Owner's Manual page 33

3. Phone Pairing
Touch the icon and the below words on information display:
Then set the phone to pair with unit. When paring finished, set the phone connect
with unit, then you can see the phone name on information display.
Touch the icon again to cancel the pairing and the below words on information
display:
4. Audio Paring
Touch the icon and see the below words on information display:
Then set the audio device to pair with unit. When paring finished, set the audio
device connect with unit, then you can see the audio device name on information
display.
Touch the icon again to cancel the pairing and the below words on information
display:
5. Pin Code
You can change the PIN code by remote control. Press the [CLR] button of remote
control to clear the PIN code, and input the new 4 digitals number, press the [SETUP]
button of remote control to save the new code.
6. Information Display
NOTE:
The unit can pair with totally 5 different devices including cell phones and audio
players. Use the [PHONE] / [AUDIO PLAYER] buttons of remote control to connect /
disconnect the device.
1, When you want to connect another paired cell phone with unit, to press the
[PHONE] button of remote control to disconnect the current connecting cell phone;
use the another cell phone to connect with the unit without paring operations.
2, When you disconnected the current connecting cell phone, also you can press the
[PHONE] button of remote control to connect the cell phone with the unit again.
3, When you want to connect another paired audio player with unit, to press the
[AUDIO PLAYER] button of remote control to disconnect the current connecting
audio player; use the another audio player to connect with the unit without paring
operations.
4, When you disconnected the current connecting audio player, also you can press
the [AUDIO PLAYER] button of remote control to connect the audio player with the
unit again.
- 32 -